The uniqueness of lip seals

              A lip seal is a rotary seal incorporating a deflected lip seal geometry. Anti-rotational devices such as flanges and O-rings are often utilized to prevent the seal from rotating with the shaft. Standard and custom sizes are available with a wide selection of PTFE materials. Lip seals are suitable for sealing corrosive and abrasive media. A wide range of geometries and materials are available, depending on specific application requirements. Lip seals are often used on motors and compressors and other components with high speed rotary shafts due to their ability to resist wear even while pressurized.

The most common lip shape is the chamfered or back-beveled design and is available with the V and C Series spring types. This design allows for ease of installation and permits lubrication to nest under the lip and feed through in reciprocating dynamic applications. The result is a microscopic film of lubrication that increases seal and hardware service life. Since the footprint (contact point) of a chamfered lip is a single point, all of the sealing force is concentrated on that point, yielding the highest sustainability and lowest friction.

Applications often involve medias with abrasive particles that can get caught between the seal lip and the mating hardware. This increases wear to both the seal and the mating surface. To prevent particles from accumulating, the scraper lip design is available with all three spring types. The scraper lip contact point is positioned directly over the load point of the spring in each design for maximum scraping action. The scraper lip can be positioned on the ID, OD or both. The scraper lip also stays in place better in a stepped gland where the step is not very large.

The beaded shape contacts the surface in much the same way as an O rings, and is available with the V and H Series spring types. Similar to the chamfered lip, it is easy to install and helps to lubricate the reciprocating sealing surface. In fact, the beaded lip yields a film of oil that is slightly thicker than that of a chamfered lip, making it advantageous for applications with rapid reciprocating motion. Darcoid Nor-Cal Seal is an excellent supplier of lip seals.

Darcoid Nor-Cal Seal provides sealing solutions which are highly cost effective, have high production rate sourcing to the highest technologies. A single lip seal can play an important role in two directions' seal and is applicable for different seal media such as oil, water, gas, chemical medium and other mixed media. The uniqueness of these lip seals from the house of Darcoid Nor-Cal Seals makes the product reliable and sustainable.

Darcoid Nor-Cal Seal is a leading distributor of hydraulic seals. Darcoid Nor-Cal Seal has been providing standard and custom-made lip seals for a wide range of applications and industries for a long time as an industry leader and has been providing Hydraulic Seals for the Aerospace and Military markets where quality is of utmost importance.